Features
- King cable is the low cost answer to eliminate injuries caused by broken air hose connections
- King safety cable reaches across the hose fittings to provide standby safety for hose. Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose.
- Thoroughly tested with years of service. A positive safeguard for air hose connections – Helps you meet today’s safety standards.
- Highly resistant to rust and corrosion
- Must be installed in the extended position (no slack)
- No tools needed – Easy to install and remove
Warning
This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Specification
- Brand: Dixon Valve
- Product Type: Hose-to-Hose Service
- Maximum Operating Pressure: 200 PSI
- Wire Rope and Springs Material: Galvanized carbon steel
- Ferrules: Aluminum
- Cable: 1/8″
- Hose ID: 1/2″ to 1-1/4″
- Weight: 0.2 lb
- Length: 20-1/4″
Applications
When hose, couplings or clamps fail, or there is an accidental separation of the assembly, King safety cables minimize damage to equipment and injuries to operators.
Safety Notes
- King safety cable must be installed in the extended position (no slack)
- The canada occupational Safety and Health regulations Part XIII, 13:6b states: “Where an air hose is connected to a portable air powered tool used by an employee, a restraining device shall be attached to all hose connections, in order to prevent injury to an employee in the even of an accidental disconnection of a hose.”
Downloads
Specification Sheet
