Warning
California Residents: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
Features
- King cable is the low cost answer to eliminate injuries caused by broken air hose connections
- King safety cable reaches across the hose fittings to provide standby safety for hose. Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose.
- Thoroughly tested with years of service. A positive safeguard for air hose connections – helps you meet today’s safety standards.
- Highly resistant to rust and corrosion
- Must be installed in the extended position (no slack)
- No tools needed – easy to install and remove
Specification
- Brand: Dixon Valve
- Product Type: Hose-to-Hose Service
- Maximum Operating Pressure: 200 PSI
- Wire Rope and Springs Material: Galvanized carbon steel
- Ferrules: Aluminum
- Hose ID: 1-1/2″ to 3″
- Cable: 1/4″
- Weight: 1.06 lb
- Length: 38″ (965 mm)
Applications
When hose, couplings or clamps fail, or there is an accidental separation of the assembly, King safety cables minimize damage to equipment and injuries to operators.
Safety Notes
- King safety cable must be installed in the extended position (no slack)
- The canada occupational Safety and Health regulations Part XIII, 13:6b states: “Where an air hose is connected to a portable air powered tool used by an employee, a restraining device shall be attached to all hose connections, in order to prevent injury to an employee in the even of an accidental disconnection of a hose.”
Downloads
Specification Sheet
